Snow chains
Only certain fine-link snow chains have been tested by BMW, classified as safe for use and recommended. Consult your BMW center for more information. Snow chains must be mounted in pairs and on the rear wheels only. Observe the manufacturer's instructions when mounting snow chains. Do not exceed a speed of 30 mph/50 km/h with chains.
Do not initialize the Flat Tire Monitor if snow
chains are mounted; otherwise, the instrument might issue an incorrect reading.
When driving with snow chains, you may find it helpful to activate DTC temporarily.
See also:
Configuring ECO PRO
1. "Settings"
2. "Driving mode"
3. "Configure ECO PRO"
4. Configure the program.
ECO PRO Tip
▷ "ECO PRO limit:":
Set ECO Pro speed at which an ECO ...
Instrument lighting
Adjusting
The parking lamps or low beams
must be switched on to adjust the
brightness.
Adjust the brightness using the
thumbwheel. ...
Visual warning
The approach of the vehicle to an object can be
shown on the Control Display. Objects that are
farther away are displayed on the Control Display
before a signal tone sounds.
A display appears a ...
