Pinch protection system

If the closing force exceeds a specific value as a window closes, the closing action is interrupted.

The window reopens slightly.

Even with the pinch protection system, check Danger of pinching even with pinch protection
Even with the pinch protection system, check that the window's closing path is clear; otherwise, the closing action may not stop in certain situations, e.g., if thin objects are present.◀

Do not install any accessories in the range Do not use window accessories
Do not install any accessories in the range of movement of the windows; otherwise, the pinch protection system will be impaired.◀

Closing without the pinch protection system

For example, if there is an external danger or if ice on the windows prevents a window from closing normally, proceed as follows:

1. Pull the switch past the resistance point and hold it there.

Pinch protection is limited and the window reopens slightly if the closing force exceeds a certain value.

2. Pull the switch past the resistance point again within approx. 4 seconds and hold it there.

The window closes without pinch protection.

    See also:

    Indication of a flat tire
    The yellow warning lamp lights up. A Check Control message is displayed. There is a flat tire or a major loss in tire inflation pressure. 1. Reduce your speed and stop cautiously. Avoid ...

    Fuel
    Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not avai ...

    The concept
    The central locking system becomes active when the driver's door is closed. The system simultaneously engages and releases the locks on the following: ▷ Doors. ▷ Trunk lid. ▷ ...