Closing

Monitor the closing process and make Danger of pinching
Monitor the closing process and make sure that the closing path of the window is clear; otherwise, injuries may result.◀

resistance point. Pull the switch to the resistance point.
The window closes while the switch is held.

resistance Pull the switch beyond the resistance point.

The window closes automatically.

Pressing the switch stops the motion.

Convenient operation,, via the remote control or the door lock.

Convenient closing, with Comfort Access.

    See also:

    Fold-out position of the wipers
    Required when changing the wiper blades or under frosty conditions, for example. 1. Switch off the ignition. 2. Under frosty conditions, ensure that the wiper blades are not frozen onto the wind ...

    Low tire pressure message
      The yellow warning lamp lights up. A Check Control message is displayed. ► There is a flat tire or a major loss in tire inflation pressure. ► The system was not reset after ...

    iDrive in the rear
    Operation is the same as for the iDrive in the front. To adjust the volume: turn, arrows 1. To activate the controller and switch between the screens: press the buttons, arrows 2. ...