Personal Profile

The concept

You can set many of your BMW's functions to suit your personal needs and preferences. Without any action on your part, Personal Profile ensures that most of these settings are stored for the remote control currently in use. When you unlock the car, the remote control used for the purpose is recognized and the settings stored for it are called up and implemented.

This means that your personal settings will be activated for you, even if in the meantime your car was used by someone else with another remote control and the corresponding settings. The individual settings are stored for a maximum of four remote controls. They are stored

for two remote controls if Comfort Accessis in use.

Personal Profile settings

For more information on specific settings, refer to the specified pages.

> Programming the Programmable memory keys,
> Response of the central locking system when the car is unlocked,
> Automatic locking of the vehicle,
> Automatic call-upof the driver's seat position,
> Triple turn signal activation,
> Settings for the display on the Control Display and in the instrument cluster:
> 12h/24h format of the clock,
> Date format,
> Brightness of the Control Display,
> Language of the Control Display,
> Units of measure for fuel consumption, distance covered/remaining distances, and temperature,
> Show visual warning for Park Distance Control PDC,
> Light settings:
> Welcome lamps,
> Pathway lighting,
> Daytime running lights,
> High-beam Assistant,
> Automatic climate control: activating/deactivating AUTO program, cooling function and automatic recirculated air control, setting temperature, air volume and distribution,  ff
> Entertainment:
> Tone control,
> Speed-dependent volume control,

    See also:

    Notes
    One person per safety belt Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.◀ Putting on the belt Lay ...

    Storing
    1. Switch on the ignition. 2. Set the desired position. 3. Press the button. The LED in the button lights up. 4. Press the desired button 1 or 2. The LED goes out. If the M button is pre ...

    Resetting the system
    Reset the system after each correction of the tire inflation pressure and after every tire or wheel change. 1. "Vehicle Info" 2. "Vehicle status" 3. "Reset" 4. S ...