Controls

Activating

Switch position ignition switched with the ignition switched on.

The turning lamps are automatically switched on depending on the steering angle or the use of turn signals.

To avoid blinding oncoming traffic, the adaptive light control directs light towards the front passenger side when the vehicle is at a standstill.

When driving in reverse, only the turning lamp is active.

    See also:

    The concept
    Two radar sensors below the rear bumper monitor the area behind and next to the vehicle at speeds above approx. 30 mph/50 km/h. The system indicates whether there are vehicles in the blind sp ...

    Driving
    I'd feel a bit bad for the driver on that trip, though. While the 400-horsepower, turbocharged 4.4-liter V-8 engine is relatively sprightly in the 750i, I thought it was a bit of a laggard while t ...

    Declaration according to NHTSA/FMVSS 138 Tire Pressure Monitoring Systems
    Each tire, including the spare (if provided) should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire i ...