See also:

Functional requirements
The system must have been initialized when the tire inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Initialize the system after each correction of th ...

Malfunction
The cooler cannot be switched on or switches off, e.g., when the cooling system overheats or if the battery voltage is low. One of the LEDs flashes. Remedy the problem 1. If necessary, allow t ...

Parking lamps/low beams,headlamp control
General information Switch position: 0, , If the driver door is opened with the ignition switched off, the exterior lighting is automatically switched off at these switch settings. Parking lamps ...