Wiper blade replacement
General information
Do not fold down the wipers without wiper
blades
Do not fold down the wipers if wiper blades have
not been installed; this may damage the windshield.◄
Replacing the front wiper blades
1. To change the wiper blades, fold up, refer to
page 67, the wiper arms.
2. Fold up the wipers.

3. Position the wiper blade in a horizontal position.
4. Remove the wiper blade toward one side.

Replace rear wiper blade
1. Lift off the wiper fully and pull off the wiper blade, arrow.

2. Attach a new wiper blade. It must engage audibly.
See also:
Coolant temperature
Should the coolant, and with it the engine, become
too hot, a Check Control message is displayed.
Check the coolant level. ...
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts. This information
can be found on the battery.
2. Switch off the engine of the assisting vehicle.
3. Switch off any el ...
Fold-out position of the wipers
Required when changing the wiper blades or
under frosty conditions, for example.
1. Switch off the ignition.
2. Under frosty conditions, ensure that the
wiper blades are not frozen onto the wind ...
