For X3 xDrive28i: Oil levelcheck

The concept

The oil level is monitored electronically during driving and shown on the Control Display.

If the oil level reaches the minimum level, a check control message is displayed.

Displaying the oil level

1. "Vehicle Info"
2. "Vehicle status"
3. Possible messages "Engine oil level"

Possible messages

► "Engine oil level OK"
► "Engine oil at minimum. Add 1 quart of engine oil "

When the display appears in the instrument cluster, add 1 US quart/liter of oil within the next 125 miles/200 km.

► "Engine oil level below minimum. Add 1 quart " Immediately add 1 US quart/liter of oil.

Detailed measurement

Requirements:

► Vehicle is on a level road and the engine is running at operating temperature.
► Automatic transmission: Selector lever in transmission position N or P and gas pedal not depressed.

In order to perform a detailed measurement of the engine oil level:

1. "Vehicle Info"
2. "Vehicle status"
3. 4. "Start measurement" "Measure engine oil level"
4. "Start measurement"

The oil level is checked and displayed via a scale.

During the detailed measurement, the idle speed is increased somewhat.

Duration: approx. 1 minute.

    See also:

    Navigation
    General information Map Split screen settings Destination guidance with intermediate destinations ...

    Floor panel flap
    Floor panel flap To access the onboard vehicle tool kit etc. To open, swing up the flap by the handle, refer to arrow. The cargo floor cover is lockable. ...

    Switching on/off manually
    Press the button. On: the LED lights up. Off: the LED goes out. The PDC is shown on the Control Display. Switch on the backup camera via the iDrive. ...