Updating the navigation data

General information

Navigation data are stored in the vehicle and can be updated.

Current navigation data and the authorization code are available from your service center.

► Depending on the data volume, a data update may take several hours.
► Update during the trip to preserve battery.
► During the update, only the basic functions of the navigation system are available.
► The status of the update can be viewed.
► The system restarts after the update.
► Remove the data carrier with the navigation data after the update.

Professional navigation system:

performing an update

1. Insert the navigation DVD into the DVD player with the labeled side facing up.
2. Follow the instructions on the Control Display.
3. Enter the navigation DVD authorization code.
4. Change the DVD, if necessary.

After interrupting your trip, follow the instructions on the Control Display.

Viewing the status

1. 2. "Navigation update" Press the button.
2. "Navigation update"

    See also:

    Increasing or decreasing vehicle speed
    Specify desired speed in the range from approx. 4 mph/6 km/h to approx. 15 mph/25 km/h using the rocker switch of the cruise control on the steering wheel. Vehicle speed can be changed by lightl ...

    Reference
    This chapter contains technical data, short commands for the voice activation system, and an index that will quickly take you to the information you need. ...

    Setting
    Pull the switch. The LED lights up. The indicator lamp lights up red. The parking brake is set. Lower lamp: indicator lamp in Canadian models Set the parking brake and further secure ...