Date
The date is displayed in the
instrument
cluster.
Set the date on the Control Display, refer to page 83.
See also:
Switching on
The cooler can be operated at two levels.
1. Switch on the ignition.
2. Press the button once for
each cooling
level.
The highest cooling power is active when
two LEDs are lit.
If the coole ...
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts. This information
can be found on the battery.
2. Switch off the engine of the assisting vehicle.
3. Switch off any el ...
Switching off automatically
The system switches off and the LED goes out:
After approx. 160 ft/50 m when driving forward.
Above approx. 22 mph/36 km/h when driving
forward.
Switch on the system again if necessary. ...