Route criteria
General information
▷ The route calculated can be influenced by
selecting certain criteria.
▷ The route criteria can be changed when the
destination is entered and during destination
guidance.
▷ Road types are part of the navigation data
and are taken into consideration when planning
a route, e.g., avoid highways.
▷ The recommended route may differ from the
route you would take based on personal experience.
▷ The settings are stored for the remote control
currently in use.
▷ Destination guidance with traffic bulletins
Changing the route criteria
1. "Navigation"
2. "Map"
3.
"Route preference"
4. Select the criterion:
▷ "Fast route": time-optimized
route,
being a combination of the shortest possible
route and the fastest roads.
▷ "ECO PRO route": optimized
combination
of the fastest and shortest
route.
▷ "Short route": short distance,
irrespective
of how fast or slow progress will
be.
▷ "Alternative routes": if available, alternative
routes are suggested during active
route guidance.
The individual suggestions are highlighted in color.
5. Specify additional criteria for the route, if necessary:
▷ "Avoid highways": highways are
avoided wherever possible.
▷ "Avoid toll roads": toll roads are avoided
wherever possible.
▷ "Avoid ferries": ferries are avoided
where possible.
See also:
Lamps
At a glance
1 Rear fog lamps*
2 Front fog lamps*
3 Automatic headlamp control / adaptive light
control* / high-beam assistant* / welcome
lamps / daytime running lights*
4 Lamps off / daytime ...
The concept
When the low beams are switched on, this system
automatically switches the high beams on
and off. The procedure is controlled by a sensor
on the front of the interior rearview mirror. The
assi ...
Switching off automatically
The system switches off and the LED goes out:
After approx. 33 ft/10 m when driving forward.
Above approx. 9 mph/15 km/h when driving
forward.
Switch on the system again if necessary. ...