Malfunction

A Check Control message is displayed.

On the Control Display, the areas in front of and

On the Control Display, the areas in front of and behind the vehicle are shaded. PDC has failed.

Have the system checked.

To ensure full operability:

▷ Keep the sensors clean and free of ice.
▷ When using a pressure washer, keep the sprayer moving and maintain a distance of at least 12 in/30 cm from the sensors.

    See also:

    Increasing or decreasing vehicle speed
    Specify desired speed in the range from approx. 4 mph/6 km/h to approx. 15 mph/25 km/h using the rocker switch of the cruise control on the steering wheel. Vehicle speed can be changed by light ...

    Displays
    Symbol Function Service requirements Engine oil Roadworthiness test Front brake pads Rear brake pads Brake fluid ...

    Putting into operation after a power failure
    Putting the parking brake into operation The parking brake should only be put into operation again if it was manually released due to an interruption in the supply of electrical power. Otherw ...