Deactivating/activating DTC Dynamic Traction Control
Activating the Dynamic Traction Control DTC provides maximum traction on loose ground.
Driving stability is limited during acceleration and when driving in bends.
Activating DTC
Press the button.
TRACTION is displayed in the instrument cluster and the indicator lamp for DSC lights up.
Deactivating DTC
Press the button again.
TRACTION and the DSC indicator lamp go out.
Indicator/warning lamps
When DTC is activated, TRACTION is displayed in the tachometer.
The indicator lamp lights up:
DTC Dynamic
Traction Control is activated.
See also:
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts and approximately
the same capacitance in Ah. This information
can be found on the battery.
2. Switch off the engine ...
2012 BMW 535 Review by Joe Wiesenfelder
I don't walk away from every new model with a single overriding impression,
but sometimes a car grabs me by the collar and shakes me. While that wasn't
exactly the case with the redesigned 2011 BM ...
Engine compartment
Vehicle equipment
All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not avai ...