Deactivating DSC: DSC OFF

When DSC is deactivated, driving stability is reduced during acceleration and when driving in bends.

Stabilizing interventions by the Integral Active Steering system are only performed by the rear axle steering.

To increase vehicle stability, activate DSC again as soon as possible.

Deactivating DSC

not longer Press and hold the button, but not longer than approx. 10 seconds, until the indicator lamp for DSC lights up in the instrument cluster and DSC OFF is displayed.

The DSC system is switched off.

Activating DSC

DSC OFF and the DSC indicator lamp Press the button.

DSC OFF and the DSC indicator lamp go out.

Indicator/warning lamps

When DSC is deactivated, DSC OFF is displayed in the instrument cluster.

DSC is deactivated. The indicator lamp lights up: DSC is deactivated.

    See also:

    BMW TwinPower Turbo technology in the new four-cylinder engine
    This new engine is the most powerful in a new generation of four-cylinder petrol units based on the same reduced-friction core engine, their different output ratings being achieved principally by ...

    Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. There is a flat tire or a major loss in tire inflation pressure. The system was not reset after a wheel change ...

    Tilt alarm sensor
    The tilt of the vehicle is monitored. The alarm system responds in situations such as attempts to steal a wheel or tow the car. ...