Turn signal
Using turn signals
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever to the resistance point.
Unusually rapid flashing of the indicator lamp indicates that a turn signal bulb has failed.
Triple turn signal activation
Press the lever to the resistance point.
The turn signal flashes three times.
The function can be activated or deactivated:
1. "Settings"
2. "Lighting"
3. "Triple turn signal"
Signaling briefly
Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.
See also:
Radio
When the same radio source is selected in the
front and rear (e.g., FM/AM), the same radio station
is played.
Operation is the same as for the front radio. ...
Programming
▷ LED, arrow 1.
▷ Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press the two outer memory buttons 1 and
3 for approx. 20 ...
Running a function
Press the
button.
The function will run immediately. This
means, for example, that the number is dialed
when a phone number is selected. ...