General information

The iDrive functions can be stored on the programmable memory buttons and called up directly, e.g., radio stations, navigation destinations, phone numbers and entry points into the menu.

The settings are stored for the remote control currently in use.

    See also:

    Checking the coolant level
    1. Do not open the hood until the engine has cooled down. 2. Turn the expansion tank cap counterclockwise slightly to allow any accumulated pressure to escape; then continue turning to open. ...

    Image on the Control Display
    Switching on the rear view camera using iDrive With PDC activated: "Rear view camera" The image of the rear view camera is displayed. The setting is stored for the remote control cur ...

    Tail lamps, bulb replacement
    At a glance 1 Turn signal 2 Backup lamp 3 Inside brake lamp 4 Tail lamp 5 Tail lamp/brake light Turn signal, tail lamp and brake lamp Follow the general instructions on lamps and bulbs. 21- ...