Notes

If the battery is discharged, an engine can be started using the battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles.

To prevent personal injury or damage to both vehicles, adhere strictly to the following procedure.

To avoid the risk of potentially fatal injury, Do not touch live parts

To avoid the risk of potentially fatal injury, always avoid all contact with electrical components while the engine is running.

    See also:

    Programming
    LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...

    Belt-force limiter
    The effect of the belt-force limiter on the driver's seat is dependent on the position of the driver's seat. To maintain the long-term accuracy of this function, the driver's seat must be calib ...

    Closing
    1. Fit the fuel cap and turn it clockwise until you clearly hear a click. 2. Close the fuel filler flap. Do not pinch the retaining strap Do not pinch the retaining strap attached to the cap; ...