Socket for OBD Onboard Diagnosis

Position

There is an OBD socket on the driver's side for

There is an OBD socket on the driver's side for checking the primary components in the vehicle emissions.

Emissions

▷ The warning lamp lights up:

▷ The warning lamp lights up:

Emissions are deteriorating. Have the vehicle checked as soon as possible.

Canadian model: warning light indicates the engine symbol.

▷ The warning lamp flashes under certain circumstances:

This indicates that there is excessive misfiring in the engine.

Reduce the vehicle speed and have the system checked immediately; otherwise, serious engine misfiring within a brief period can seriously damage emission control components, in particular the catalytic converter.

Fuel cap

The indicator lamp lights up.

The indicator lamp lights up.

If the fuel cap is not properly tightened, the OBD system may conclude that fuel vapor is escaping. If the cap is then tightened, the display should go out in a short time.

    See also:

    Engine oil temperature
    Engine oil temperature ▷ Cold engine: the pointer is at the low temperature end. Drive at moderate engine and vehicle speeds. ▷ Normal operating temperature: the pointer is in th ...

    Tilt alarm sensor
    The tilt of the vehicle is monitored. The alarm system responds in situations such as attempts to steal a wheel or when the car is towed. ...

    Switching on automatically
    With the engine running or the ignition switched on, shift the selector lever into position R. The image of the rear view camera is displayed when the system has been switched on using iDrive. ...