See also:

Programming
LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...

Tail lamps
▷ Turn signal, backup lamp: 21-watt bulb, H21W. ▷ Brake lamp, brake force display: 21-watt bulb, P21W ▷ Tail lamp: LED technology. Contact your service center in the event of ...

Coolant level
Checking 1. Let the engine cool. 2. Turn the cap of the expansion tank slightly counterclockwise to allow any excess pressure to dissipate, and then open it. 3. The coolant level is correct if ...