Status display
The tire and system status is indicated by the color of the tires.
A change in the tire inflation pressure during driving is taken into account.
A correction is only necessary if this is indicated by the TPM
Wheels, green
The tire inflation pressure is equal to the target state.
One wheel is yellow
A flat tire or major drop in inflation pressure in the indicated tire.
All wheels are yellow
▷ A flat tire or major drop in inflation pressure in several tires.
▷ The system was not reset after a wheel change and thus warns based on the inflation pressures initialized last.
▷ A flat tire in one or more tires while the system is being reset.
Wheels, gray
The system cannot detect a flat tire. Reasons for this may be:
▷ TPM is being reset.
▷ Disturbance by systems or devices with the same radio frequency.
▷ Malfunction.
See also:
Tire inflation pressures at max. speedsabove 100 mph/160 km/h
Speeds above 100 mph/160 km/h
In order to drive at maximum speeds in excess
of 100 mph/160 km/h, please observe, and,
if necessary, adjust tire pressures for speeds
exceeding 100 mph/160 km/h fro ...
Engine stop
The engine is switched off automatically during
a stop under the following conditions:
Manual transmission:
▷ Neutral is engaged and the clutch pedal is
not pressed.
▷ The driver's ...
Note
Manufacturer's information for LATCH
child restraint fixing systems
To mount and use the LATCH child restraint fixing
systems, observe the operating and safety
information from the system manu ...
