Condition Based Service CBS

Sensors and special algorithms take into account the driving conditions of your vehicle.

Based on this, Condition Based Service determines the maintenance requirements.

The system makes it possible to adapt the amount of maintenance you need to your user profile.

Details on the service requirements, can be displayed on the Control Display.

On the Control Display, the remaining distances and times for selected maintenance requirements and any legally required deadlines can be displayed individually

See also:

Tire tread
Summer tires Do not drive with a tire tread depth of less than 0.12 in/3 mm. There is an increased danger of hydroplaning if the tread depth is less than 0.12 in/3 mm. Winter tires Do not driv ...

Automatic mode
The automatic engine start/stop function is operational after each engine start. The function is activated above a certain speed. ▷ Manual transmission: above 3 mph, approx. 5 km/h. ▷ ...

Low tire pressure message
The yellow warning lamp lights up. A Check Control message is displayed. ▷ There is a flat tire or a major loss in tire inflation pressure. ▷ The system was not reset after a whee ...