Calibrating the digital compass

The digital compass must be calibrated in the following situations:

▷ An incorrect compass direction is shown.

The cardinal direction displayed does not change even if the direction of travel changes.
▷ Not all compass directions are shown.

Procedure

1. Make sure that there are no large metal objects or overhead power lines in the vicinity of the vehicle and that there is enough space to drive in a circle.

2. Set the currently valid compass zone.

3. Press the adjustment button for 6‑7 seconds to call up C. Then drive at least one full circle at a maximum speed of 4 mph/7 km/h.

When the system is calibrated, the C is replaced by the compass directions.

    See also:

    Supplementary text messages
    Addition information, such as on the cause of a fault or the required action, can be called up via Check Control. The supplementary text of urgent messages is displayed on the Control Display a ...

    Malfunction
    The small warning lamp flashes in yellow and then lights up continuously; the larger warning lamp comes on in yellow. On the Control Display, the tires are shown in gray and a message appear ...

    Units of measure
    Setting the units of measure To set the units for fuel consumption, route/distance and temperature: 1. "Settings" 2. "Language/Units" 3. Select the desired menu item. 4. S ...