Initialization
The initialization process adopts the set inflation tire pressures as reference values for the detection of a flat tire. Initialization is started by confirming the inflation pressures.
Do not initialize the system when driving with snow chains or with a compact wheel.
1. "Vehicle Info"
2. "Vehicle status"
3. 
"Reset"
4. Start the engine - do not drive away.
5. Start the initialization with "Reset".
6. Drive away.
The initialization is completed while driving, which can be interrupted at any time.
The initialization automatically continues when driving resumes.
See also:
General information
Overloading the vehicle
To avoid exceeding the approved carrying
capacity of the tires, never overload the vehicle.
Overloading can lead to overheating and increases
the rate at which damage deve ...
Lane departure warning
The concept
Starting at a specific speed, this system alerts
you when the vehicle on streets with lane markings
is about to leave the lane. Depending on the
country-specific version of the vehicle ...
2010 BMW X5 Review
Aside from a low clatter at startup, there are few initial signs that BMW's diesel-powered X5 is a different sort of beast. Drive it you must, though, because diesel power is addictive. As is the ca ...