Checking the oil level

The concept

The oil level is monitored electronically and displayed on the Control Display.

Requirements

  • The engine must be running and warm after the vehicle has been driven for at least 6 miles/10 km.
  • The vehicle is stopped or being driven on a level roadway.

Displaying the oil level

1. "Vehicle Info"
2. "Vehicle status"
3. "Engine oil level"

Possible messages

Possible messages

  • "Engine oil level OK"
  • "Measurement not possible at this time."
  • "Measuring engine oil level..."

Duration with the engine running: approx. 3 minutes.

Duration while driving: approx. 5 minutes.

  • "Engine oil level below minimum. Add 1 quart!"
    Add oil within the next 125 miles/200 km.
  • "Engine oil level too high! Have this checked."

Have the vehicle checked immediately.

Have the vehicle checked immediately; Too much engine oil

Have the vehicle checked immediately; otherwise, surplus oil can lead to engine damage.

checked." "Measurement inactive. Have this checked."

Note the newly calculated remaining mileage until the next oil service. Have the system checked as soon as possible.

    See also:

    Activating the assistance functions
    More than one assistance function can be active at the same time. Showing the parking aid lines "Parking aid lines" Pathway and turning circle lines are displayed. Showing the obstacl ...

    Weather Band
    General information The availability of the Weather Band and the number of available channels can vary depending on the region. Switching on the Weather Band 1. "Radio" 2. "Weat ...

    Switching on/off manually
    Switching on/off manually Press the button. ▷ On: the LED lights up. ▷ Off: the LED goes out. The PDC is shown on the Control Display. Switch on the backup camera via the iDrive. ...