Display on the Control Display

Switching on the backup camera via iDrive

With Top View switched on:

The backup camera image is displayed. The setting "Rear view camera"

The backup camera image is displayed. The setting is stored for the remote control currently in use.

Brightness

With Top View switched on:

1. 2. Turn the controller until the desired setting "Brightness"

2. Turn the controller until the desired setting is reached and press the controller.

Contrast

With Top View switched on:

1. 2. Turn the controller until the desired setting "Contrast"

2. Turn the controller until the desired setting is reached and press the controller.

Displaying the turning circle and pathway lines

  • The static, red turning circle line shows the space needed to the side of the vehicle when the steering wheel is turned all the way.
  • The variable, green pathway line assists you in assessing the amount of space actually needed to the side of the vehicle.

The pathway line is dependent on the current steering angle and is continuously adjusted with the steering wheel movement.

Turning circle and pathway lines are displayed. "Parking aid lines"

Turning circle and pathway lines are displayed.

    See also:

    Storage compartments in thecargo area
    Storage space under the cargo floor cover Raise the cargo floor panel. The storage space under the cargo floor panel is subdivided. Two additional subdividers can be inserted to partition it ...

    Daytime running lights
    With the ignition switched on, the daytime running lights light up in position 0, or . After the ignition is switched off, the parking lamps light up in position . Activating/deactivating 1. ...

    Pinch protection system
    If the closing force when closing the glass sunroof exceeds a certain value, the closing movement is stopped, beginning at approximately the middle of the opening in the roof, or from the tilt ...