Initializing

In rare cases, it may become necessary to initialize the Integral Active Steering.

The warning lamp lights up. A Check

The warning lamp lights up. A Check Control message is displayed.

1. With the engine running, turn the steering wheel all the way to the left and right several times in a uniform manner until the warning lamp disappears.

2. Have the system checked if the warning lamp does not go out after moving the steering wheel approx. 6 times or if the steering wheel is at an angle.

Using snow chains

Ensure that the rear axle steering is deactivated when using snow chains.

    See also:

    Destination entry by map
    Selecting the destination 1. "Navigation" 2. "Map" The current position of the vehicle is indicated on the map. 3. "Interactive map" 4. Select the destination w ...

    Switching the high beams on and off manually
    Switching the high beams on and off manually   ▷ High beams on, arrow 1. ▷ High beams off/headlamp flasher, arrow 2. To reactivate the High-beam Assistant, briefly push the tu ...

    Switching the wipers on/off and brief wipe
    Do not switch on the wipers if frozen Do not switch on the wipers if they are frozen onto the windshield; otherwise, the wiper blades and the windshield wiper motor may be damaged. Switch ...