Engaging the transmission position

  • Transmission position P can only be disengaged if the engine is running and the brake pedal is pressed.
  • With the vehicle stationary, press on the brake pedal before shifting out of P or N; otherwise, the shift command will not be executed: shift lock.

To prevent the vehicle from creeping after Depress the brake until you start driving

To prevent the vehicle from creeping after you select a driving position, maintain pressure on the brake pedal until you are ready to start.

Engaging D, R and N

Briefly push the selector lever in the desired direction,

Briefly push the selector lever in the desired direction, beyond a resistance point if necessary.

After releasing the selector lever, it returns to its center position.

Press the Unlock button to:

Press the Unlock button to:

  • Engage R.
  • Shift out of P.

Engaging P

Press button P.

Press button P.

    See also:

    Fuses
    Never attempt to repair a blown fuse and do not replace a defective fuse with a substitute of another color or amperage rating; otherwise, this could lead to a circuit overload, ultimately result ...

    Warning triangle
    The warning triangle is located in the container on the inside of the trunk lid. Unscrew the wing nut to open. ...

    DTC Dynamic TractionControl
    The concept The DTC system is a version of the DSC in which forward momentum is optimized. The system ensures maximum forward momentum on special road conditions, e.g., unplowed snowy roads, bu ...