Transmission positions

D Drive, automatic position

Position for normal vehicle operation. All forward gears are available.

R is Reverse

Select only when the vehicle is stationary.

N is Neutral

Use in automatic car washes, for example. The vehicle can roll.

When the ignition is switched off, position P is engaged automatically.

P Park

Select only when the vehicle is stationary. The drive wheels are blocked.

P is engaged automatically:

  • After the engine is switched off, if the car is in radio ready state, or if the ignition is switched off, and if position R or D is engaged.
  • If the ignition is switched off and position N is engaged.
  • If the safety belt is unbuckled, the driver's door is opened, and the brake pedal is not pressed while the vehicle is stationary and transmission position R or D is engaged.

Kickdown

Kickdown is used to achieve maximum driving performance. Press on the accelerator beyond the resistance point at the full throttle position.

    See also:

    Switching spoken instructions on/off
    The setting is stored for the remote control currently in use. 1. "Navigation" 2. "Map" 3. "Voice instructions" Repeating spoken instructions 1. "Navigatio ...

    Tow fitting
    The screw-in tow fitting should always be carried in the vehicle. It can be screwed in at the front or rear of the BMW. It is located in the container on the inside of the trunk lid. Tow fit ...

    Saying commands
    Activating voice activation system1.  Press the button on the steering wheel. 2.  Wait for the acoustic signal. 3.  Say the command.   This symbol on the Control Display and ...