Fold-out position of the wipers

Required when changing the wiper blades or under frosty conditions, for example.

1. Switch off the ignition.

2. Under frosty conditions, ensure that the wiper blades are not frozen onto the windshield.

3. Press the wiper lever up beyond the point of resistance and hold it for approx. 3 seconds, until the wiper remains in a nearly vertical position.

After the wipers are folded back down, the wiper system must be reactivated.

Before switching the ignition on, fold the Fold the wipers back down

Before switching the ignition on, fold the wipers back down to the windshield; otherwise, the wipers may become damaged when they are switched on.

1. Switch on the ignition.

2. Press the wiper levers down. The wipers move to their resting position and are ready for operation.

    See also:

    Contrasting light surfaces imbue the rear with brio and energy
    The strong horizontal lines of the rear - including rear lights in customary BMW L-shaped design positioned at the outer edges of the back end - accentuate the broad face of the wheels and wide tr ...

    Washer fluid reservoir
    Adding washer fluid Only add washer fluid when the engine is cool, and then close the cover completely to avoid contact between the washer fluid and hot engine parts. Otherwise, there is the ...

    Entering an address using a command
    1. Press the button on the steering wheel. 2. Enter address 3. Wait for a request from the system. 4. Say the address in the suggested order. 5. Continue making the entry as prompted by the ...