All other models: Oil levelcheck
The concept
The oil level is monitored electronically during driving and shown on the Control Display.
If the oil level reaches the minimum level, a check control message is displayed.
Requirements
► The engine must be running and warm after
the vehicle has been driven for at least
6 miles/10 km.
► The vehicle is stopped or being driven on a
level roadway.
Displaying the oil level
1. "Vehicle Info"
2. "Vehicle status"
3.
"Engine oil level"
Possible messages
► "Engine oil level OK"
► "Measurement not possible at this time."
► "Measuring engine oil level..."
Duration with the engine running: approx.
3 minutes.
Duration while driving: approx. 5 minutes.
► "Engine oil level below minimum. Add 1
quart "
Add oil within the next 125 miles/200 km.
► "Engine oil level too high Have this checked."
Have the vehicle checked immediately.
Too much engine oil
Have the vehicle checked immediately;
otherwise, surplus oil can lead to engine
damage.◄
► "Measurement inactive. Have this checked." Note the newly calculated remaining mileage until the next oil service. Have the system checked as soon as possible.
See also:
System limits
Sudden tire damage
Sudden serious tire damage caused by
external influences cannot be indicated in advance.
◀
The system does not operate correctly if it has
not been reset. For exampl ...
Using BMW TeleService
BMW TeleService are typically activated in the
vehicle.
Even if the BMW TeleService are not active, a
voice contact to Roadside Assistance is still
possible.
To continue using or to deactivate ...
Terminating destination guidance
1. "Navigation"
2. "Map"
3. "Guidance"
4. "Stop guidance" ...
