Engaging the transmission position

► Transmission position P can only be disengaged if the engine is running and the brake pedal is pressed.
► With the vehicle stationary, press on the brake pedal before shifting out of P or N; otherwise, the shift command will not be executed: shift lock.

To prevent the vehicle from creeping after Depress the brake until you start driving
To prevent the vehicle from creeping after you select a driving position, maintain pressure on the brake pedal until you are ready to start.◄

Engaging D, R and N

Briefly push the selector lever in the desired direction,

Briefly push the selector lever in the desired direction, beyond a resistance point if necessary.

After releasing the selector lever, it returns to its center position.

Press unlock button, in order to:

Press unlock button, in order to:

► Engage R.
► Shift out of P.

Engaging P

Press button P.

Press button P.

    See also:

    Warning triangle
    Warning triangle The warning triangle is located on the inside of the trunk lid. To remove, loosen the bracket. ...

    Controls
    This chapter is intended to provide you with information that will give you complete control of your vehicle. All features and accessories that are useful for driving and your safety, comfort an ...

    Configuring the prewarning
    After the warning function is switched on, the following can be set via the iDrive: The prewarning can be switched on/off. The time of the prewarning can be set. These settings have no effe ...