Starting the engine

Starting the engine The engine starts automatically under the following conditions:

► Automatic transmission:

By releasing the brake pedal.

When Automatic Hold is activated: press the accelerator.

After the engine starts, accelerate as usual.

Safety mode

After the engine switches off automatically, it will not start again automatically if any one of the following conditions are met.

► The driver's safety belt is unbuckled and the driver's door is open.
► The hood was unlocked.

Some indicator lamps light up for varying lengths of time.

The engine can only be started via the Start/ Stop button.

Note

Even if driving away was not intended, the deactivated engine starts up automatically in the following situations:

► Excessive warming of the passenger compartment when the cooling function is switched on.
► The steering wheel is turned.
► Automatic transmission: the transmission position is changed from D to N, R, or M/S.
► Automatic transmission: the transmission position is changed from P to N, D, R, or M/ S.
► Fogging of the windows when the automatic climate control is switched on.
► The vehicle battery charge is very low.
► Excessive cooling of the passenger compartment when the heating is switched on.

    See also:

    Tire tread
    Summer tires Do not drive with a tire tread depth of less than 0.12 in/3 mm. There is an increased danger of hydroplaning if the tread depth is less than 0.12 in/3 mm. Winter tires Do not driv ...

    DTMF suffix dialing
    DTMF suffix dialing can be used for gaining access to network services or for controlling devices, e.g., to make a remote inquiry of an answering machine. The DTMF code is needed for this purpose. ...

    A new interior
    The new BMW 7-Series comes with one of the most luxurious interiors of any premium car. In addition to a new iDrive controller and larger 10.2-inch screen, owners will be able to programme frequen ...