Mounts for the lower LATCH anchors

Make sure that the lower LATCH anchors have Correctly engage the lower LATCH anchors
Make sure that the lower LATCH anchors have properly engaged and that the child restraint fixing system is resting snugly against the backrest; otherwise, the degree of protection offered may be reduced.◀

Before mounting the LATCH child restraint fixing system, pull the belt away from the child restraint fixing system.

Without a through-loading system:

Position

Without a through-loading system:
Without a through-loading system:

Position

Mounts for the lower LATCH anchors are located in the gap between the seat and backrest

With a through-loading system:

Position

With a through-loading system:
With a through-loading system:

Position

Mounts for the lower LATCH anchors are located behind the indicated covers.

    See also:

    Radio ready state
    Activate radio ready state: ▷ When the ignition is switched off: press ON/ OFF button on the radio. ▷ When the engine is running: press START/ STOP button. Some electronic systems/p ...

    Switching on/off and interrupting cruise control
    Switching on Press the button on the steering wheel. The indicator lamps in the instrument cluster light up and the mark in the speedometer is set to the current speed. Cruise control can ...

    Removing: manual head restraints
    Only remove the head restraint if no one will be sitting in the seat in question. 1. Pull the head restraint upward as far as possible. 2. Press the button, arrow 1, and pull the head restrain ...