Initializing after a power failure

After a power failure during the opening or closing process, the roof can only be operated to a limited extent.

Initializing the system

The system can be initialized when the vehicle is stationary and the engine is running.

During the initialization, the roof closes without pinch protection.

Monitor the closing process and make Danger of pinching
Monitor the closing process and make sure that the closing path of the glass sunroof is clear; otherwise, injuries may result.◀

until the initialization is complete: Press the switch up and hold it until the initialization is complete:

▷ Initialization begins within 15 seconds and is completed when the sunroof and sliding visor are completely closed.
▷ The roof closes without pinch protection.

    See also:

    Cameras
    Cameras The two camera lenses are located on the sides of the bumper. The image quality may be impaired by dirt. Clean the lens. ...

    2012 BMW 3 Series Sedan: First Look
    Competes with: Mercedes-Benz C-Class, Infiniti G37, Audi A4 Looks like: A little bit bigger outside, just a teensy bit bigger inside Drivetrain: 240-hp, 2.0-liter twin-turbocharged inline-four cylin ...

    Display on the Control Display
    Switching on the backup camera via iDrive With PDC activated: "Rear view camera" The backup camera image is displayed. The setting is stored for the remote control currently in use ...