Notes

washers Steam jets or high-pressure washers

When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃.

Holding them too close or using excessively high pressures or temperatures can cause damage or preliminary damage that may then lead to long-term damage.

Follow the operating instructions for the highpressure washer.

highpressure Cleaning sensors/cameras with highpressure washers

When using high-pressure washers, do not spray the exterior sensors and cameras, e.g., Park Distance Control, for extended periods of time and only from a distance of at least 12 in/ 30 cm.

Wash your vehicle frequently, particularly in winter.

Intense soiling and road salt can damage the vehicle.

    See also:

    Strength of the driver's and front passenger airbag
    The strength with which the driver's and front passenger airbags are triggered depends on the position of the driver's and front passenger seats. To maintain the accuracy of this function over ...

    Pairing and connecting a device
    Pairing a device To avoid becoming distracted and posing an unnecessary hazard both to your own vehicle's occupants and to other road users, only pair the device while the vehicle is stationa ...

    At a glance
    The destinations previously entered are stored automatically. These destinations can be called up and used as a destination for destination guidance. ...