Connecting the cables

1. Open the cover of the BMW starting aid terminal.

2. Attach one terminal clamp of the positive jumper cable to the positive terminal of the battery, or to the corresponding starting aid terminal of the assisting vehicle.

3. Attach the other end of the cable to the positive terminal of the battery, or to the corresponding starting aid terminal of the vehicle to be started.

4. Attach one terminal clamp of the negative jumper cable to the negative terminal of the battery, or to the corresponding engine or body ground of assisting vehicle.

5. Attach the other end of the cable to the negative terminal of the battery, or to the corresponding engine or body ground of the vehicle to be started.

    See also:

    System limits
    Top View cannot be used in the following situations: ▷ With a door open. ▷ With the trunk lid open. ▷ With an exterior mirror folded in. ▷ In poor light. A Check Control m ...

    Voice phone book
    Depending on how your vehicle is equipped, it may be necessary to create your own voice phone book. The entries must be entered using voice activation and are separate from the memory in the ...

    Route criteria
    General information ► The route calculated can be influenced by selecting certain criteria. ► The route criteria can be changed when the destination is entered and during destination ...