Coolant level
Checking
1. Let the engine cool.
2. The coolant level is correct if it lies between the minimum and maximum marks. The marks are on the side of the coolant reservoir.
Adding engine oil
1. Let the engine cool.
2. Turn the cap of the coolant reservoir slightly counterclockwise to allow any excess pressure to dissipate, and then open it.

3. If the coolant is low, slowly add coolant up to the specified level; do not overfill.
4. Turn the cap until there is an audible click.
5. Have the cause of the coolant loss eliminated as soon as possible.
See also:
Before driving into a car wash
In order for the vehicle to be able to roll into a car
wash, heed the information regarding Washing
in automatic car washes ...
Around the center console: controls and displays
1. Coupe: microphone for voice activation systemand for telephonein
hands-free mode
Convertible: microphone on steering column
2. SOS: initiating an Emergency Request call
3. ...
Locking separately
The trunk lid can be locked separately using the
switch in the front center armrest.
Trunk lid secured, arrow 1.
Trunk lid not secured, arrow
2.
Slide the switch into the arrow 1 posit ...
