Updating the navigation data

General information

Navigation data are stored in the vehicle and can be updated.

Current navigation data and the authorization code are available from your service center.

▷ Depending on the data volume, a data update may take several hours.

▷ Update during the trip to preserve battery.

▷ During the update, only the basic functions of the navigation system are available.

▷ The status of the update can be viewed.

▷ The system restarts after the update.

▷ Remove the data carrier with the navigation data after the update.

Performing an update

1. Insert the navigation DVD into the DVD player with the labeled side facing up.

2. Follow the instructions on the Control Display.

3. Enter the navigation DVD authorization code.

4. Change the DVD, if necessary.

After interrupting your trip, follow the instructions on the Control Display.

Viewing the status

1. 2. "Navigation update" Press the button.

2. "Navigation update"

    See also:

    Safety
    The BMW 650i has not been crash-tested by the National Highway Traffic Safety Administration and Insurance Institute for Highway Safety. Neither organization typically tests low-volume cars with s ...

    Starting playback
    1. Push the CD/DVD into the drive with the labeled side facing upward. The CD/DVD is automatically pulled in. ▷ Playback begins automatically after a few seconds. ▷ Otherwise: sele ...

    Jump-starting
    Notes If the battery is discharged, an engine can be started using the battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles. To prevent pe ...