Displays in the instrument cluster

Desired speed

▷ The marking lights up in

▷ The marking lights up in green: the system is active.

▷ The marking lights up in orange:

the system has been interrupted.

▷ The marking does not light up: the system is switched off.

Brief status display

Selected desired speed. Selected desired speed.

If --- appears briefly on the display for Check Control messages, it is possible that the system requirements for operation are currently not met.

Distance to vehicle ahead of you

The selected distance to the vehicle driving ahead of you is shown.

Distance display

Distance 1 Distance 1

Distance 2 Distance 2

Distance 3 Distance 3

Distance 4 Distance 4
This value is set after the system is switched on.

The system has been interrupted or The system has been interrupted or distance control is deactivated because the accelerator is being pressed; a vehicle was not detected.

Distance control is deactivated because Distance control is deactivated because the accelerator is being pressed; a vehicle was detected.

Rolling bars: the detected vehicle has driven away.

Indicator/warning lamps

Personal responsibility Personal responsibility

The indicator and warning lamps do not relieve the driver of the responsibility to adapt his or her desired driving speed and style to the traffic conditions.

Depending on how the vehicle is equipped, Depending on how the vehicle is equipped, the indicator lamp in the instrument cluster indicates whether the system is switched on.

The vehicle symbol lights up in orange: The vehicle symbol lights up in orange:

A vehicle has been detected ahead of you.

The vehicle symbol flashes orange: The vehicle symbol flashes orange:

The conditions are not adequate for operating the system.

The system was deactivated but applies the brakes until you actively assume control by pressing on the brake pedal or accelerator.

The vehicle symbol flashes red and an The vehicle symbol flashes red and an acoustic signal sounds:

You are requested to intervene by braking or making an evasive maneuver.

    See also:

    Maximum cooling
    Press the button. The system is set to the lowest temperature, maximum air volume and recirculated-air mode. Air flows out of the vents for the upper body region. Open them for this purpose. ...

    Saying the entries
    ▷ The town/city, street, and house number can be entered as a single command. ▷ Spell the entry if the spoken language and the language of the system differ. ▷ Say the letters ...

    Components of the integrated Owner'sManual
    The integrated Owner's Manual consists of three parts, which offer various levels of information or access possibilities. Quick Reference Guide Located in the Quick Reference is important inform ...