Starting the engine
The engine starts automatically under the following
conditions:
▷ Manual transmission:
The clutch pedal is pressed.
▷ Automatic transmission:
By releasing the brake pedal.
After the engine starts, accelerate as usual.
Safety mode
After the engine switches off automatically, it will not start again automatically if any one of the following conditions are met.
▷ The driver's safety belt is unbuckled and the driver's door is open.
▷ The hood was unlocked.
Some indicator lamps light up for varying lengths of time.
The engine can only be started via the Start/ Stop button.
Note
Even if driving away was not intended, the deactivated engine starts up automatically in the following situations:
▷ Excessive warming of the passenger compartment when the cooling function is switched on.
▷ The steering wheel is turned.
▷ Automatic transmission: the transmission position is changed from D to N, R, or M/S.
▷ Automatic transmission: the transmission position is changed from P to N, D, R, or M/ S.
▷ The vehicle begins rolling.
▷ Fogging of the windows when the automatic climate control is switched on.
▷ The vehicle battery charge is very low.
▷ Excessive cooling of the passenger compartment when the heating is switched on.
▷ Low brake vacuum pressure; this can occur, for example, if the brake pedal is depressed a number of times in succession.
See also:
Rear view camera and Surround View deliver a perfect overview
A rear view camera is also available for the new BMW 3-Series Sedan as an
extension of the Park Distance Control (PDC) system. PDC uses sensors in the
bumpers to detect the distance to obstacles i ...
Display on the Control Display
Display the computer or trip computer on the
Control Display.
1. "Vehicle Info"
2. "Onboard info" or "Trip computer"
Resetting the fuel consumption and
speed
1. & ...
Controls
Controls
1. Control Display
2. Controller with buttons
The buttons can be used to open the menus
directly. The controller can be used to select
menu items and create the settings.
The button ...
