Initializing after a power failure

After a power failure during the opening or closing process, the roof can only be operated to a limited extent.

Initializing the system

The system can be initialized when the vehicle is stationary and the engine is running.

During the initialization, the roof closes without pinch protection.

Monitor the closing process and make Danger of pinching

Monitor the closing process and make sure that the closing path of the glass sunroof is clear; otherwise, injuries may result.

Press the switch up and hold it

Press the switch up and hold it until the initialization is complete:

▷ Initialization begins within 15 seconds and is completed when the sunroof is completely closed.

▷ The roof closes without pinch protection.

    See also:

    Automatic Hold
    The concept This system assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when it is s ...

    2012 BMW 3 Series Sedan: First Look
    Competes with: Mercedes-Benz C-Class, Infiniti G37, Audi A4 Looks like: A little bit bigger outside, just a teensy bit bigger inside Drivetrain: 240-hp, 2.0-liter twin-turbocharged inline-four cylin ...

    Bypassing a section of the route
    Calculate a new route for a route section. 1. "Navigation" 2. "Route information" 3. "New route for" 4. Turn the controller. Enter the number of kilometers within ...