Service data in the remote control

BMW X5 / BMW X5 Owners Manual / Mobility / Maintenance / Condition Based Service CBS / Service data in the remote control

Information on the required maintenance is continuously stored in the remote control. Your service center will read out this data and suggest the right array of service procedures for your vehicle.

Therefore, hand your service specialist the remote control that you used most recently.

Make sure the date is set correctly; otherwise, the effectiveness of CBS Setting the correct date
Make sure the date is set correctly; otherwise, the effectiveness of CBS Condition Based Service is not ensured.◀

    See also:

    Switching off automatically
    The system switches off and the LED goes out: After approx. 160 ft/50 m when driving forward. Above approx. 22 mph/36 km/h when driving forward. Switch on the system again if necessary. ...

    Onboard vehicle tool kit
    The onboard vehicle tool kit is located on the right side in the cargo area in a storage compartment. Open the cover. ...

    Managing a subscription
    To be able to enable or unsubscribe from the channels, you must have reception. It is usually at its best when you have an unobstructed view of the sky. The channel name is displayed in the status ...