Selecting channels
You can only listen to enabled channels.
The selected channel is stored for the remote control currently in use.
Via the iDrive
1. "Radio"
2. "Satellite radio"
3. Select "All channels" or the desired category.
4. Select the desired channel.
Select the desired channel
Via the button on the radio
Press the button.
The next channel is selected.
Via direct channel entry
1. "Radio"
2. "Satellite radio"
3. 
"Set channel"
4. Turn the controller until the desired channel is reached and press the controller.
See also:
Malfunction
The yellow warning lamp flashes
and
then lights up continuously. A Check
Control message is displayed. No flat
tire can be detected.
Display in the following situations:
▷ A wheel wit ...
Engine stop
The engine is switched off automatically during
a stop under the following conditions:
Manual transmission:
► Neutral is engaged and the clutch pedal is
not pressed.
► The driver' ...
Rear doors
Rear doors
Push the locking lever on the rear doors down.
The door can now be opened from the outside
only. ...