Mounting LATCH child restraint fixing systems

1. Mount the child restraint fixing system; refer to the operating instructions of the system.

2. Ensure that both LATCH anchors are properly connected.

    See also:

    Switching off automatically
    The system switches off and the LED goes out: ▷ After approx. 33 ft/10 m when driving forward. ▷ After approx. 9 mph/15 km/h when driving forward. Switch on the system again if necess ...

    Resetting the system
    Reset the system after each correction of the tire inflation pressure and after every tire or wheel change. 1. "Vehicle Info" 2. "Vehicle status" 3. "Reset" 4. S ...

    Actions in the event of a flat tire
    Normal tires 1. Identify the damaged tire. Do this by checking the air pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Tire Pressure Monitor may not ...