Map view for split screen

The map view can be selected for the split screen independently from the main screen.

1. Open "Options".

2. "Split screen"

3. Move the controller to the right repeatedly until the split screen is selected.

4. Select "Split screen content" or the scale.

5. Select the map view.

  • "Arrow display"
  • "Map facing north"
  • "Map direction of travel"
  • "Map view with perspective"
  • "Position"
  • "Exit ramp view": selected blind driveways are displayed three dimensionally. Setting in some cases will affect the display in the Head-Up Display*.
  • "Traffic conditions/gray map"

6. To change the scale: select the split screen and turn the controller.

    See also:

    Image on the Control Display
    Switching on the rear view camera using iDrive With Top View activated:    "Rear view camera" The image of the rear view camera is displayed. The setting is stored for the ...

    Functional requirements
    The system must have been initialized when the tire inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Initialize the system after each correction of th ...

    Drive away without delay
    Do not wait for the engine to warm up while the vehicle remains stationary. Start driving right away, but at moderate engine speeds. This is the fastest way for the cold engine to reach its ope ...