Pedestrian detection
The pedestrian detection and warning system only operates in darkness and only when a heat image is displayed.
Warm objects that are similar in shape to human beings are detected by the system.
People detected by the system are displayed with a slight yellow hue.
Under good ambient conditions, the pedestrian detection system operates within a range of approx. 50 ft/15 m to approx. 330 ft/100 m.
Environmental influences can limit the availability of pedestrian detection.
If pedestrian detection is not available, a symbol is displayed in the heat image.
This symbol disappears when the function becomes available again.
See also:
Roadside Assistance
At a glanceBMW Roadside Assistancecan be contacted if assistance is needed in the
event of a breakdown.
Contact with BMW Roadside Assistancecan also be established using a Check
Control message.
...
Programming
▷ LED, arrow 1.
▷ Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press the two outer memory buttons 1 and
3 for approx. 20 ...
Roadside parking lamps
The vehicle can be illuminated on one side.
Switching on
With the ignition switched off, press the lever
either up or down past the resistance point for
approx. 2 seconds.
Switching off
Briefl ...