DSC OFF
Driving stability is limited during acceleration and when driving in bends.
Stabilizing interventions by the Integral Active Steering* system are only performed by the rear axle steering.
To increase vehicle stability, activate DSC again as soon as possible.
Activating DSC OFF
Press and hold the button, but
not longer
than approx. 10 seconds, until the
indicator lamp for the DSC lights up in the instrument
cluster and DSC OFF is displayed in
the tachometer.
The DSC system is switched off.
Deactivating DSC OFF
Press the button.
DSC OFF and the DSC indicator lamp
go out.
Indicator/warning lamps
When DSC OFF is activated, DSC OFF is displayed in the tachometer.
The indicator lamp lights up: DSC
OFF
is activated.
See also:
Tire damage
General information
Inspect your tires often for damage, foreign objects
lodged in the tread, and tread wear.
Notes
Driving over rough or damaged road surfaces, as
well as debris, curbs and other ...
Mobility
To ensure that you remain mobile at all times, this
chapter supplies you with important information
on the topics of fuels and lubricants, wheels and
tires, service, maintenance, and Roadside
Assi ...
Navigation
Route planning can be performed separately on
the left and right sides in the rear. Destination
guidance can only be started from the front.
Operation is the same as for the front navigation.
Su ...
