Switching the high beams on and off manually
- High beams on, arrow 1.
- High beams off/headlamp flasher, arrow 2.
To reactivate the High-beam Assistant, press the button on the turn signal lever.
See also:
General information
The sound settings are stored for the remote
control currently in use. ...
Switching off the engine
Procedure
1. Engage transmission position P with the vehicle
stopped.
2. Press the Start/Stop button.
3. Set the parking brake.
4. Remove the remote control from the ignition
lock
Before driv ...
Drive-off assistant
This system supports driving away on gradients.
The parking brake is not required.
1. Hold the vehicle in place with the foot brake.
2. Release the foot brake and drive away without
delay.
After ...