Automatic headlamp control

Switch position are switched: the low beams are switched on and off automatically, e.g., in tunnels, in twilight or if there is precipitation. The indicator lamp in the instrument cluster lights up.

A blue sky with the sun low on the horizon can cause the lights to be switched on.

The low beams always stay on when the fog lamps are switched on.

The automatic headlamp control cannot Personal responsibility

The automatic headlamp control cannot serve as a substitute for your personal judgment in determining when the lamps should be switched on in response to ambient lighting conditions.

For example, the sensors are unable to detect fog or hazy weather. To avoid safety risks, you should always switch on the lamps manually under these conditions.

    See also:

    Display
    ▷ Lines, arrow 1: the system is activated. ▷ Arrows, arrow 2: at least one lane marking was detected and warnings can be issued. ...

    Turn signal
    Using turn signals Using turn signals Press the lever beyond the resistance point. To switch off manually, press the lever to the resistance point. Unusually rapid flashing of the indicator la ...

    Activating the High-beam Assistant
    1. Turn the light switch to . 2. With the low beams switched on, briefly push the turn indicator lever in the direction of the high beam. Activating the High-beam Assistant The indicator lam ...