Turn signal, high beams, headlamp flasher

Turn signal

Using turn signals

Press the lever beyond the resistance point.

Press the lever beyond the resistance point.

To switch off manually, press the lever to the resistance point.

Unusually rapid flashing of the indicator lamp indicates that a turn signal bulb has failed.

Triple turn signal activation

Press the lever to the resistance point.

The turn signal flashes three times.

The function can be activated or deactivated:

1. "Settings"

2. "Lighting"

3. "Triple turn signal"

Signaling briefly

Signaling briefly

Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

High beams, headlamp flasher

  • High beams, arrow 1.
  • Headlamp flasher, arrow 2.
    See also:

    Operating the programs
    For Dynamic Damper Control*, the lower button is labeled with COMFORT. Automatic program change The system automatically switches to NORMAL in the following situations: Failure of Integral ...

    Actions in the event of a flat tire
    Normal tires 1. Identify the damaged tire. Do this by checking the air pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor may not hav ...

    Adjusting the volume
    Turn the volume button while giving an instruction until the desired volume is set. ▷ The volume remains constant even if the volume of other audio sources is changed. ▷ The volume i ...